Laundry to landscape Products

The brass 1" 3-way Valve is a central and valuable part of your laundry to landscape greywater system. The valve gets installed within operator's reach at the washing machine. It has 2 working… more details

This part is used in our Laundry to Landscape system to connect the 1" PVC pipe to the 1.5" auto-vent. We recommend using teflon thread tape at the threaded joint to prevent moisture escaping.

The Barbed 1" x 1/2" reducing tee is used at each location along your laundry to landscape system where water is emitted to specific plants.  Perpendicular to your prepared infiltration… more details

The PVC 1" x 3/4" Threaded Bushing (MPT x FPT) is used to attach a 3/4" barbed male pipe end fitting to the 3-way valve. This part is ONLY recommended if you have a 3/4" inner diameter washing… more details

The Barbed 1" Tee is used to branch your main 1" greywater tubing into two directions. This is useful in systems where you plan to direct laundry greywater to multiple basins that are not arranged… more details

The Barbed 1" Insert Adapter connects your 1" PVC pipe to 1" tubing - usually once you have already exited the building.  The "insert" side of the fitting has the same outer diameter as 1"… more details

The 1" PVC 45 degree elbow is used to make turns in a 1" PVC pipe. All our PVC fittings are schedule 40.

Use these elbows to make sharp turns in 1" tubing. Because fittings add turbulence to the flow of water (which adds load on your washing machine pump) we recommend you minimize the use of elbows,… more details

A Hose Clamp is used to create a water tight seal when connecting the washer hose end to a 1" barbed male pipe fitting.  These can also be used at the 1" barbed fittings outside to help… more details

In a laundry to landscape system it is used to connect the anti-siphon (auto-vent) to the system. SxSxS (slip by slip by slip). PVC is schedule 40

The Barbed 1" Male Adapter (MPT) threads into the 3-way valve and the barbed end inserts into the 1" washer hose.

It is also used to create two zones in the landscape in conjunction with a… more details

In a laundry to landscape system this can be used to connect your three way valve to a 3/4" washing machine hose. You will also need a 3/4" by 1" threaded bushing.

In a rain barrel… more details

Used to connect two ends of  1" poly tubing together or to mend damage to 1" laundry to landscape main distribution lines.

The 1" PVC  90 degree elbow is used to make 90 degree turns in schedule 40 PVC pipe. 

A 1" PVC coupling is used to connect 1" PVC pipe ends together.

The PVC 1" Male Adapter (S x MPT) is used in the laundry to landscape greywater system. One gets threaded into both exit ports of the 3-way valve and creates a slip connection to glue in PVC pipe.… more details

Connect small sections of 1/2" poly tubing to the 1/2" fitting on the Barbed 1" x 1/2" Reducing Tees at each of the greywater basins. 

Specify how many feet you'll need and we'll cut it… more details

After burying your 1" poly tubing, stake it down with these hold-downs to prevent it from surfacing. They are galvanized to prevent rust and lengthen their life.  These stakes work for 3/4"… more details

The Barbed 1" Female Hose Thread Adapter is used during the installation and maintenance of the laundry to landscape greywater system. It is connected to the greywater tubing 1" mainline and a… more details

The Barbed 1" Male Hose Thread Adaptor is optionally used during the installation and maintenance of the laundry to landscape greywater system. It can be put installed just before a 1" Female Host… more details

The underground emitter box or "mulch shield"  is used to create a subsurface irrigation area where the greywater can flow out into the mulch basin. The air gap between the outlet and the… more details

This is an alternative to the toxic smelling PVC cement and primer! Non flammable and virtually odorless and user-safe. This is primer and glue in one; the "greenest" PVC glue on the market.

The Auto-vent or Air Admittance Valve allows air to enter into the laundry to landscape greywater system but doesn't allow water to exit. It is used to prevent a siphon from sucking water out of… more details

The Green Back Valve Barbed 1/2" is used to adjust the flow from greywater outlets. For unfiltered greywater, this is a point of potential clogging and should be monitored. Green back valves have… more details

The Green Back Valve Barbed 1" is used to control the outflow of a 1 inch line, or to shut off a 1 inch branch. In a laundry to landscape system do not use these on all the ends or branches; one… more details